The spiral vase print is one I have done on most of my previous printers. This time I used Sunlu white PLA with Creality’s generic settings on Creality Print.

Eiffel Tower Part A & B. I was excited to try this print, as a friend of mine has always struggled doing it on his CR10S. The print speed I used was 300 mms. Which is normal speed for a K1 Max. It has been suggested I could finish it off with some lights. if you would…

16 Minute Benchy I’ve seen this as a bit of a trend on YouTube, with K1 Max owners. A 16 minute benchy was the first print, as I had seen so many videos doing it too. Highlighted in the timelapse is the potential speed of the K1 Max. I am very excited that I got to try…

3D Printers – The Evolution (So Far…) CARTESIAN My printers: Creality CR10, CR10S, CR10SV2, CR10SV3, CR10 MAX Over the time that I have been doing 3D printing, I have challenged myself with upgrading and modifying my previous printers, this can be with both hardware, and firmware. An important consideration before attempting any firmware changes, would be the components…

New printer Creality K1 Max Creality K1 Max has a camera built in and a lidar sensor .which helps when you doing things like bed levelling it automatically calibrates the flow of the filament and also has a feature called spaghetti detection can’t wait to get some good footage of my prints

maintenance What with getting ready for Christmas it seemed like a good time for the Printers to be down for maintenance, upgrades and  a general clean. Because over the year they have done a lot of work estimating well over 1000 hours of print. Also, time and as technology advances it’s sometimes good to look for upgrades…